Upperbunk 2 Switch PowerPod® w/USB, Level & Nightlight

Description

Switchable LED light AND a red LED Nightlight for the kiddos, all accessible from the top bunk!

This replaces one the A/C vent right above the slider giving you added USB power points in a very handy location plus an LED area light for the lower passenger area, a front to back level AND a red LED Nightlight for the kiddos!!!! I have this on in my van and love it. there is a single white LED that illuminates the floor area in front of the slider. So easy to flip it on in the dark to see what is on the floor. Plus I included a directional red LED that is the perfect nightlight for the kiddos, and it’s built in!

**Please note that the brown option is NOT a match for the VW brown interior.

Please note:

• USE A PROPERLY SIZED FUSE (NOT SUPPLIED) WHEN INSTALLING!
• Components are supplied by various manufacturers.
• This custom-made product is exempt from the right of withdrawal in the EU.

Basic Electrical Schematic:

General Install Instructions:

• I ran a new fused power wire from the Aux battery up the B Pillar.
• Unscrew the fasteners holding up the headliner.
• Run wire across and tuck inside the headliner and into the vent channel above the slider.
• Remove stock vent above slider.
• Install a ground screw at a spot close to the Upper Bunk PowerPod®.
• Connect wiring as per the basic schematic above. (Wiring is really up to you, it depends on how you’d like it to operate.)
• Test the unit to make sure that it functions as you intend.
• Reinstall all of the screws that you removed.